|
JUNE 2017
Drop In / Surface Mount Package AVAILABLE NOW FOR Comb (Harmonic) Generators With Pre-Amplifier GCA Series Input 250 MHz and Up
Herotek has expanded pre-amp comb generator GCA Series to include our new .750" (N3 package) long surface mount package for convenient placement on PCB Boards. Our GCA Series Comb Generators are used for Frequency Multipliers, Frequency Synthesizers, and built-in test source. GCA Series requires only +10 dBm or 0 dBm input for input frequency ranges from 250 MHz to 2000 MHz. Our GC Series (without preamp) also is offered in our "L" package, which is .53" long.
To review specs, CLICK here
Please consult the factory for custom configuration and more detailed model specifications.
|
|
JULY 2011
Herotek has just introduced six new product families of High Power and Broadband Limiters and one product family of a High Frequency Comb Generator.
|
|
DECEMBER 2009
|
LOW LEAKAGE LEVEL LIMITERS 0.01 - 18 GHz WITH LEAKAGE LEVELS AS LOW AS -10dBm
Herotek has just released new product family (LL Series) of low leakage level limiters. The frequency of these new limiter models go down to 10MHz and up to 18GHz with leakage levels as low as -10dBm. This new limiter product family have maximum input power handling capability of 1 Watt CW and 100 Watt Peak power along with options for leakage levels of -10dBm, -5dBm, 0dBm, or +5dBm. Bias of +5V is required with 5mA typical current draw. These new models are offered with removable connectors for circuit board assembly. |
|
JULY 2008
|
BROADBAND LOW LEAKAGE LIMITERS FROM 0.1 TO 18GHZ
Herotek has just introduced 6 new models of Broadband Limiters to our LS Low Leakage Limiter Series. The frequency of these new limiter models now go down to 100MHz and up to 18GHz. These new models have low insertion loss and typical limiting threshold of +6 dBm with a max leakage of +14 dBm at 1 Watt CW input power. These new models are offered in our standard B (SMA M/F), BF (SMA F/F), and L (surface mount, drop-in) packages. Please consult the factory for custom higher power limiters (up to 25 Watt CW or 1 KWatt pulse peak power) and custom limiters down to 10MHz. |
|
AUGUST 2004
|
Low noise, ultra wide-band 0.01 to 20 GHz Amplifiers with very low power consumption. Also available in drop-in packaging for MIC integration.
Herotek has released a new series of ultra wide-band amplifiers with a single unit covering frequency range from 0.01 to 20 GHz. These units have uncompromised input and output VSWR with excellent gain flatness. An example of one of these units, Model AF00120243A, has Minimum Gain of 24 dB, Maximum Noise Figure of 3.0, Maximum Gain Flatness of ± 1.5 dB, operating at +5V (90mA). |
|
SEPTEMBER 2004
|
DTA SERIES DETECTORS WITH INTEGRAL LOW NOISE PREAMPLIFIER
Herotek has introduced a new series of Detectors for very low signals - Direct Measurement of Microwave Signals at -80 dBm or lower over 1 to 40 GHz. The units makes low power level direct sensing easier, for both CW or Short Pulse Signals. Offered are units from 1-18 GHz, 18- 26 GHz, 26-40 GHz, and 18-40 GHz.
Characteristics of this series are very high sensitivity (1000mV/µW, -80 dBm model), stable and with quite low 1/f noise operation (output resistance 100-200 ohms typical), extremely fast pulse response (1 nsec rise time typical), matched input for low VSWR (2:1 typical) and flat frequency response. |
NEW PRODUCTS: (Contact Herotek)
- Two new 2.0 to 26 GHz Miniature Ultra-Wideband Miniature Amplifiers introduced, Models A262273 and A262274.
- Zero-Bias Schottky Detectors to 50 GHZ
- FET Amplifiers to 50 GHz
- Comb Generators to 50 GHz Output
- Transceiver Products L to Q Band
APPLICATIONS
- For more Comb Generator Information see the article "Comb Generators and Amplifiers for Active Multipliers" by John Tatum in August 1996 issue of Microwaves & RF Magazine, Page 156